Sterizen

Automated
Dual Disinfection
System

Automated Dual Disinfection System

UVM+ combines UV-C light and ultrasonic dry mist to disinfect both air and surfaces.

Ultrasonic Dry-Mist technology Creates <5 Microns ultra-fine mist that evaporates quickly and leaves no visible residue

High-efficiency 253.7nm UV-C lamps deliver consistent germicidal exposure

Built-in motion sensors up to 8m range, auto-shutoff, and timed disinfection modes (15, 30, 45 minutes)

Idea For

Our Disinfection Systems is versatile, ensuring cleanliness and safety in hospitals, clinics, schools, offices, and even
restaurants. With UV-C and Ultrasonic Dry Mist, it’s adaptable to various environments, delivering thorough
disinfection effortlessly

Hospital

Clinics

Pet Veterinary Clinics

Ambulances

Toilets

Restaurants & Others

Testing and Certifications

30+

Comprehensive parameters tested for device Efficacy, Safety & Durability

IEC 60601 Electrical Safety

Validated for electrical safety under IEC 60601-1, including touch current, dielectric strength, power input, and insulation integrity.

IEC 60601 Mechanical & Environmental Safety

Passed IEC 60601 mechanical and environmental tests such as impact, drop, stability, temperature rise, mould stress, and enclosure durability.

ISO 14698 / ISO 11737 Testing

Microbial reduction verified through plate counts, air sampling, and surface testing in lab and hospital environments

Indoor Air Quality Testing

PM10, SO₂, CO, CO₂, and H₂O₂ levels tested as per NIOSH and ASTM methods—confirmed within safe exposure limits.

CO & CO₂ Safety Evaluation

CO and CO₂ levels measured during operation remained well within OSHA/NIOSH permissible limits

What sets UVM+ apart

Feature

UVM+

Conventional Fogger / Fumigator

Ultraviolet-C light

(253.7nm) Clinically Proven Reduce Germs

Not Present

Particle Size

<5 microns residue free

10–50 microns forms residue

Disinfectant Consumption

<350ml per hour

1–3 litres per hour

Turn Around Time

Only 15 mins

30 mins–1 hr

Impact to Electronics

Very Safe

High Risk

Post Disinfection

None

Manual Mopping

FAQ

Is Sterizen UVM+ a CDC or ICMR-prescribed method of disinfection?
Sterizen UVM+ employs UV-C and dry-mist technology, acknowledged by the CDC and ICMR as supplementary disinfection methods.Key points include:
UVM+ aims to support and enhance routine cleaning, not replace it
How does Sterizen UVM+ disinfect a room
UVM+ uses a dual-action system
Together, they provide uniform air and surface disinfection in enclosed rooms after manual cleaning
How long does one disinfection cycle take?
A typical UVM+ disinfection cycle lasts 15–45 minutes based on mode and room size:
Actual times may vary due to:
The system automates timing and alerts when complete.
Can UVM+ be used when people are in the room?
No.
For safety, no one should remain in the room during operation
How much disinfectant does the system consume?
UVM+ uses an optimized misting output of approximately 350 mL/hour, enabling:
Actual usage depends on room size and cycle duration

Thanks for Your
Valuable Time!

Please answer this short survey so we can improve our product

Feedback on UVM+

Did you Like our product?*

Scroll to Top